[Federal Register: October 3, 2007 (Volume 72, Number 191)]
[Notices]
[Page 56347-56352]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr03oc07-49]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2007-0984; FRL-8151-7]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from August 3, 2007 to September 7, 2007, consists of the PMNs
and TMEs, both pending or expired, and the notices of commencement to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before November 2, 2007.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2007-0984, by one of the following methods.
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID number EPA-HQ-OPPT-2007-0984. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the Docket's normal hours of operation, and
special arrangements should be made for deliveries of boxed
information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2007-0984. EPA's policy is that all comments received will be included
in the public docket without change and may be made available online at
http://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' systems,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov your
e-mail address will be automatically captured and included as part of
the comment that is placed in the public docket and made available on
the Internet. If you submit an electronic comment, EPA recommends that
you include your name and other contact information in the body of your
comment and with any disk or CD ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at http://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket's
index available in regulations.gov. To access the electronic docket, go
to http://www.regulations.gov, select ``Advanced Search,'' then
``Docket Search.'' Insert the docket ID number where indicated and
select the ``Submit'' button. Follow the instructions on the
regulations.gov web site to view the docket index or access available
documents. Although listed in the index, some information is not
publicly available, e.g., Confidential Business Information (CBI) or
other information whose disclosure is restricted by statute. Certain
other material, such as copyrighted material, will be publicly
available only in hard copy. Publicly available docket materials are
available electronically at http://www.regulations.gov, or, if only
available in hard copy, at the OPPT Docket. The OPPT Docket is located
in the EPA Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301
Constitution Ave., NW., Washington, DC. The EPA/DC PublicReading Room
hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday,
excluding Federal holidays. The telephone numberof the EPA/DC Public
Reading Room is (202) 566-1744, and the telephone number for the OPPT
Docket is (202) 566-0280. Docket visitors are required to show
photographic identification, pass through a metal detector, and sign
the EPA visitor log. All visitor bags are processed through an X-ray
machine and subject to search. Visitors will be provided an EPA/DC
badge that must be visible at all times in the building and returned
upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: TSCA-Hotline@epa.gov.
[[Page 56348]]
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as
CBI and then identify electronically within the disk or CD ROM the
specific information that is claimed CBI). In addition to one complete
version of the comment that includes information claimed as CBI, a copy
of the comment that does not contain the information claimed as CBI
must be submitted for inclusion in the public docket. Information so
marked will not be disclosed except in accordance with procedures set
forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions - The agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at the estimate.
vi. Provide specific examples to illustrate your concerns, and
suggested alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from August 3, 2007 to September 7,
2007, consists of the PMNs and TMEs, both pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs and TMEs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 74 Premanufacture Notices Received From: 08/03/07 to 09/07/07
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-07-0602 08/03/07 10/31/07 CBI (S) Chemical (G) 1-alkene, 10,10-
intermediate diethoxy-
P-07-0603 08/03/07 10/31/07 CBI (G) A component of (G) Reaction product
adhesives of 2-propenoic acid,
2-methyl-, monoester
and a proprietary
isocyanate
P-07-0604 08/03/07 10/31/07 CIBA Specialty (S) Ultra violet (G) Poly(oxy-1,2-
Chemicals curing agent in alkyl),.alpha.-hydro-
Corporation surface modifier .omega.-hydroxy-
(for plastics) ,.alpha.-
oxoarylacetate
P-07-0607 08/07/07 11/04/07 Hybrid Plastics, Inc. (S) Flame retardant (S) 1,2-
for thermoplastic ethanediamine, N1-[3-
resins [3,5,7,9,11,13,15-
heptakis
2methylpropyl),penta
cyclo[9.5.1.13,9,15,
15.17,13]octasiloxan-
1-yl]propyl]-
P-07-0608 08/07/07 11/04/07 CBI (G) Component of (G) Aliphatic
industrial use polyurethane
coating acrylate
P-07-0609 08/08/07 11/05/07 CBI (G) Additive for (G) Sulfurized fatty
lubricants acid derivative
P-07-0610 08/08/07 11/05/07 CBI (G) Sealant (G) Bisurea compound
P-07-0611 08/08/07 11/05/07 CBI (G) Sealant (G) Bisurea compound
P-07-0612 08/08/07 11/05/07 CBI (G) Sealant (G) Bisurea compound
P-07-0613 08/08/07 11/05/07 CBI (G) Sealant (G) Bisurea compound
P-07-0614 08/09/07 11/06/07 CBI (G) Surface treatment (G) 2-arylazo-N-aryl-
for pigments 3-oxo-alkylamide
P-07-0615 08/09/07 11/06/07 CBI (G) Component of foam (G) Fatty acid
polymer with
aliphatic diol and
aromatic diacid
P-07-0616 08/09/07 11/06/07 CBI (G) Component of foam (G) Fatty acid
polymer with
aliphatic diol and
aromatic diacid
[[Page 56349]]
P-07-0617 08/10/07 11/07/07 3M Company (G) Heat transfer (G) Hydrofluoroether
fluid
P-07-0618 08/10/07 11/07/07 3M Company (G) Chemical (G) Alkyl acid
intermediate fluoride
P-07-0619 08/10/07 11/07/07 CBI (G) Lubricant (G) Alkanoldioic
additive acid, dialkyl ester
P-07-0620 08/10/07 11/07/07 CBI (G) Lubricant (G) Alkanoldioic
additive acid, dialkyl ester
P-07-0621 08/10/07 11/07/07 CBI (G) Lubricant (G) Alkanoldioic
additive acid, dialkyl ester
P-07-0622 08/10/07 11/07/07 CBI (G) Lubricant (G) Alkanoldioic
additive acid, dialkyl ester
P-07-0623 08/13/07 11/10/07 CBI (G) Filler dispersant (G) Polyalkoxylate
phosphite ester
P-07-0624 08/14/07 11/11/07 CBI (S) Anti-stain in (G) Amino functional
construction silsesquioxanes
P-07-0625 08/14/07 11/11/07 CBI (G) Additive for inks (G) Cyclic amine
and cleaners polymer with
epoxides,
alkylcarboxy derivs.
P-07-0626 08/14/07 11/11/07 CBI (G) Toner additive (G) Methyl trialkyl
ammonium chloride,
reaction products
with silicic acid,
lithium, magnesium
and sodium salt
P-07-0627 08/14/07 11/11/07 CBI (S) Acrylic polymer (G) Acrylic polymer
used in the
manufacture of
adhesive tapes
P-07-0628 08/14/07 11/11/07 CBI (G) Non-dispersive (G) Blocked aromatic
use isocyanate
P-07-0629 08/14/07 11/11/07 Croda Inc. (G) Polymer additive (G) Polyethylene
glycol dierucate
P-07-0630 08/15/07 11/12/07 CBI (G) Additive, open, (G) Polyester
non-dispersive use polyether urethane
block copolymer
P-07-0631 08/15/07 11/12/07 CBI (G) Additive, open, (G) Polyester
non-dispersive use polyether urethane
block copolymer
P-07-0632 08/15/07 11/12/07 CBI (G) Additive, open, (G) Polyester
non-dispersive use polyether urethane
block copolymer
P-07-0633 08/15/07 11/12/07 Angus Chemical (S) Intermediate (G) Nitroalcohol
Company, a chemical derivative
subsidiary of the
Dow Chemical Company
P-07-0634 08/15/07 11/12/07 Angus chemical (S) Metal working (G) Alkanolamine
Company, a fluid additive derivative
subsidiary of the
Dow Chemical Company
P-07-0635 08/16/07 11/13/07 CBI (G) Coating component (G) Styrene, polymer
with methacrylate
ester, alkene, and
substituted
trialkoxysilane
P-07-0636 08/17/07 11/14/07 CBI (G) Chemical (G) Aluminum mixed
intermediate / metal and diol
catalyst complex
P-07-0637 08/17/07 11/14/07 CBI (G) Chemical (G) Aluminum mixed
intermediate / metal and mixed diol
catalyst complex
P-07-0638 08/16/07 11/13/07 Chemtek, Inc. (S) Concrete cleaner (G) Alkylphosphonic
component acid mixture,
lithium salt
P-07-0639 08/20/07 11/17/07 CBI (S) Gas hydration (G) Ether carboxylic
inhibitor acid amide
P-07-0640 08/20/07 11/17/07 Forbo Adhesives, LLC (G) Hot melt (G) Isocyanate
polyurethane functional polyester
adhesive polyether urethane
polymer
P-07-0641 08/21/07 11/18/07 Spectra Colors Corp. (G) Dye for washable (G) Ethoxylated
ink systems triphenylmethane
P-07-0642 08/17/07 11/14/07 CBI (G) Cleaning and (G) Polystyrene
polishing chemical derivative
for semiconductor
manufacturing
P-07-0643 08/22/07 11/19/07 DIC International (G) Acrylic resin for (G) Hydroxyalkyl
(USA), LLC. coatings methacrylate,
polymer with
branched benzene,
alkyl alkenoate and
alkyl fumarate
P-07-0644 08/16/07 11/13/07 Chemtek, Inc. (S) Concrete cleaner (G) Alcohol,
component ethoxylated,
phosphated, lithium
salt
P-07-0645 08/22/07 11/19/07 DIC International (G) Acrylic resin for (G) Hydroxyalkyl
(USA), LLC. coatings methacrylate,
polymer with
branched benzene,
alkyl (c=1-6)
methacrylate, alkyl
acrylate and
alkenoic acid
P-07-0646 08/23/07 11/20/07 Firmenich Inc. (G) Chemical (S) Dodecane, 1,1,3-
intermediate triethoxy-
P-07-0647 08/23/07 11/20/07 Firmenich Inc (G) Chemical (S) Decane, 1,1-
intermediate diethoxy-
P-07-0648 08/22/07 11/19/07 Incorez Corporation (S) Amine hardener (G) Polyamnine
used in the hardner
formulation of epoxy
based paints and
coatings
P-07-0649 08/22/07 11/19/07 CBI (G) Coating (surface (G) Urethane resin
treatment)
P-07-0650 08/24/07 11/21/07 CBI (G) Paper product (G) Glyoxalated
additive acrylamide, dadmac,
2-
hydroxyethylacrylate
ternary copolymer
with amine-amide
adduct
P-07-0651 08/24/07 11/21/07 CBI (G) Crosslinker for (G) Amine-amide
polyacrylamides; adduct
additive for resins
P-07-0652 08/24/07 11/21/07 Bio-based (G) Plastics (S) Soybean oil,
Technologies, LLC reaction products
with diethanolamine
and ethaneperoxoic
acid
[[Page 56350]]
P-07-0653 08/24/07 11/21/07 CBI (S) Flame retardant (G) Ethoxylated
for plastics (eg. methylphosphonic
polyurethane) acid
P-07-0654 08/07/07 11/04/07 Cara Plastics Inc (S) Composite resins (G) Maleinated
crosslinker Acrylated epoxided
Soy oil
P-07-0655 08/22/07 11/19/07 CBI (S) Binder for in- (G) Waterborne
mold coatings polyurethane
P-07-0656 08/28/07 11/25/07 CBI (G) Dyestuff (G) Substituted
triazine derivative
P-07-0657 08/28/07 11/25/07 CBI (G) Dyestuff (G) Substituted
benzimidazol
sulfonic acid
P-07-0658 08/29/07 11/26/07 R. T. Vanderbilt (S) Anti-wear and (S) Amine bis(C11 14
Company, Inc. anti-oxidant agent branched and linear
for lubricants alkyl), tungstates
P-07-0659 08/29/07 11/26/07 CBI (G) Dyestuff (G) Substituted
triazine derivative
P-07-0660 08/29/07 11/26/07 CBI (G) Dyestuff (G) Substituted
anthraquinone
derivative
P-07-0661 08/29/07 11/26/07 CBI (G) Dyestuff (G) Substituted
phthalocyanine
P-07-0662 08/29/07 11/26/07 Cytec Industries Inc. (S) Flow-leveling (G) Substituted
additive for alkenyl-terminated
industrial coatings siloxanes and
silicones polymers
with substituted
acrylates, peroxide
initiated
P-07-0664 09/04/07 12/02/07 CBI (G) Textile additive (G) Poly(ethylene
and foam additive oxide)
P-07-0665 09/04/07 12/02/07 CBI (G) Textile additive (G) Poly(ethylene
and foam additive oxide)
P-07-0666 09/04/07 12/02/07 CBI (G) Textile additive (G) Poly(ethylene
and foam additive oxide)
P-07-0667 09/04/07 12/02/07 CBI (G) Textile additive (G) Poly(ethylene
and foam additive oxide)
P-07-0668 09/04/07 12/02/07 CBI (G) Textile additive (G) Poly(ethylene
and foam additive oxide)
P-07-0669 09/04/07 12/02/07 CBI (G) Textile additive (G) Poly(ethylene
and foam additive oxide)
P-07-0670 09/04/07 12/02/07 CBI (S) Chemical (G) Butanoic acid,
intermediate (1R)-1-ethenylalkyl
ester
P-07-0671 09/04/07 12/02/07 CBI (G) Lamination (G) Polyurethane
adhesive adhesive
P-07-0672 09/05/07 12/03/07 CBI (G) Metal working (G) Polyethylene
fluid glycol ether acid
P-07-0673 09/05/07 12/03/07 Mane, USA (G) Perfumery (S) 2(3H)-furanone,5-
ingredient (6-heptenyl)dihydro-
P-07-0674 09/07/07 12/05/07 CBI (G) Protective (G) Oxirane,
coating substituted
siliylmethyl-,
hydrolysis products
with alkanol
zirconium(4+) salt
and silica, acetates
P-07-0675 09/06/07 12/04/07 CBI (G) Destructive use (G) Phenolic amine
(antioxidant)
P-07-0676 09/06/07 12/04/07 CBI (G) Destructive use (G) Phenolic amine
(antioxidant)
P-07-0677 09/07/07 12/05/07 Itw Devcon Futura (S) Chemical (G) Aspartic acid, N-
Coatings intermediate alkyl,N-
(isocyanatoalkyl)-
,alkyl ester
P-07-0678 09/06/07 12/04/07 CIBA Specialty (G) Paper additive (G) substituted
Chemicals Benzenemethanaminium
Corporation chloride/acrylamide/
acrylic acid/
substituted
ethanaminium
chloride polymer
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received:
II. 4 Test Marketing Exemption Notices Received From: 8/03/07 to 09/07/07
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-07-0020 08/07/07 09/20/07 CBI (G) Component of (G) Aliphatic
industrial use polyurethane
coating acrylate
T-07-0021 08/17/07 09/30/07 Forbo Adhesives, LLC (G) Hot melt (G) Isocyanate
polyurethane functional polyester
adhesive polyether urethane
polymer
T-07-0022 08/10/07 09/23/07 Shell lubricants (S) Synthesis high (S) Mixture of
melt paraffinwax hydrocarbons (C20-
designed for C110) containing
numerous industrial straight and
application branched chain
alkanes produced by
synthesis from
natural gas (fisher-
tropsch)
T-07-0023 08/30/07 10/13/07 Cytec Industries Inc. (S) Flow-leveling (G) Substituted
additive for alkenyl-terminated
industrial coatings siloxanes and
silicones polymers
with substituted
acrylates, peroxide
initiated
--------------------------------------------------------------------------------------------------------------------------------------------------------
[[Page 56351]]
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
III. 49 Notices of Commencement From: 8/03/07 to 09/07/07
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-05-0321 09/06/07 08/15/07 (G) Mono-methyl maleate/
acrylic acid/
hydroxypropyl
methacrylate copolymer
P-06-0069 08/29/07 08/17/07 (G) Dialkyl carbocyclo-,
reaction products with
alkadiene, by-products
from, distant residues
P-06-0166 08/06/07 07/22/07 (S) 3h-1,2,4-triazol-3-
one, 1,2-dihydro-
P-06-0229 08/27/07 08/06/07 (G) Unsaturated aliphatic
urethane acrylate
P-06-0334 08/09/07 07/17/07 (G) Modified polyurethane
P-06-0343 08/29/07 08/17/07 (G) Dialkyl carbocyclo-,
reaction products with
alkadiene, cyclized,
dehydrogenated,
isomerized, by-products
from, distant residues
P-06-0438 08/07/07 07/21/07 (G) Fatty acids, C18-
unsaturated, dimers,
hydrogenated, polymers
with polypropylene glycol
diamine, amino acid and
polyoxyalkylenepolyamine
P-06-0576 08/06/07 07/12/07 (G) Fluoroalkylacrylate
copolymer
P-06-0608 08/29/07 08/06/07 (G) Alkyl acrylate,
polymer with alkyl
acrylates, styrene and
hydroxyalkyl acrylates,
peroxide-initiated
P-06-0677 09/05/07 08/01/07 (G) Ethylene interpolymer
P-06-0690 08/15/07 07/26/07 (G) Diphenylmethane
isocyanate polyester
elastomer
P-06-0692 08/13/07 07/16/07 (G) Derivatized
hydroxylated
triglycerides
P-06-0752 08/03/07 07/27/07 (G) Modified imidazole
P-06-0815 09/04/07 08/24/07 (S) 1,2-ethanediamine, N-
[3-
(trimethoxysilyl)propyl]-
, hydrolysis products
with wollastonite
(CA(SI03))
P-06-0816 08/16/07 07/18/07 (G) Modified reaction
products of alkyl
alcohol, halogenated
alkane, substituted
epoxide, and amino
compound
P-06-0829 08/06/07 08/02/07 (S) Fatty acids, canola-
oil, me esters
P-07-0009 08/27/07 08/07/07 (G) Aqueous polyurethane
dispersion
P-07-0058 08/22/07 08/13/07 (S) 3-hexene, 1-(2-
butenyloxy)-, (3Z)-
P-07-0087 09/04/07 08/28/07 (G) Partially fluorinated
condensation polymer
P-07-0097 08/09/07 06/08/07 (S) 2-propenoic acid, 2-
methyl-, butyl ester,
polymer with
ethenylbenzene and 2-
sulfoethyl 2-methyl-2-
propenoate, ammonium salt
P-07-0220 08/13/07 07/05/07 (G) Aliphatic polyester-
polyether polyurethane
resin
P-07-0228 08/31/07 08/20/07 (G) Polyether modified
polydimethylsiloxane
P-07-0253 09/07/07 08/14/07 (G) Polyether-modified
siloxane
P-07-0258 08/22/07 08/03/07 (G) Acrylic acid polymer
with vinylphosphonic acid
and ethylene glycol
acrylate
P-07-0261 08/08/07 07/05/07 (G) Urethane acrylate
resin
P-07-0268 08/09/07 06/08/07 (G) Substituted
benzoxazolium salt
P-07-0283 08/22/07 08/14/07 (S) Thiophene, 2,5-dibromo-
3-hexyl-
P-07-0286 08/23/07 07/30/07 (G) Phenol, 4,4'-(1-
methylethylidene)bis[disu
bstituted-, polymer with
disubstituted phenol
P-07-0287 08/17/07 08/01/07 (G) Phenol, 4,4'-(1-
methylethylidene)bis[disu
bstituted-, polymer with
disubstituted phenol,
substituted propenoate
P-07-0301 08/16/07 07/30/07 (G) Thioketone
P-07-0329 09/07/07 08/16/07 (G) Derivative of 2,4-
dihydroxy benzophenone
P-07-0332 08/29/07 08/10/07 (G) Alkyloxy carboxylic
acid
P-07-0335 08/03/07 07/27/07 (G) Epoxy resin
P-07-0337 08/16/07 08/01/07 (G) Polyester polyurethane
P-07-0349 08/30/07 08/23/07 (G) Fluorinated
alkylammonium salt
P-07-0367 08/08/07 07/20/07 (G) Fluorinated zinc
dialkyldithiophosphate
P-07-0369 08/21/07 07/30/07 (S) Definition:
Extractives and thier
physically modified
derivatives. Populus
Nigra
P-07-0369 08/21/07 07/30/07 (S) Oils, poplar, Populus
Nigra
P-07-0370 08/06/07 07/23/07 (G) Glycol phosphite
P-07-0379 08/08/07 08/01/07 (S) Ethanol, 2,2',2''-
nitrilotris-, polymer
with .alpha.-hydro-
.omega.-hydroxypoly(oxy-
1,4-butanediyl) and 1,1'-
methylenebis[4-
isocyanatocyclohexane], 2-
hydroxyethyl acrylate-
blocked
P-07-0393 08/06/07 07/28/07 (G) Isocyanate functional
polyester urethane
polymer
P-07-0401 08/17/07 08/01/07 (S) 2-propenoic acid, 2-
methyl, 2-hydroxyethyl
ester, homopolymer
P-07-0412 08/23/07 08/04/07 (G) 2-propenoic acid, 2-
methyl-, polymer with 2-
ethylhexyl 2-propenoate,
methyl 2-methyl-2-
propanoate, substituted-1-
propanesulfonic acid and
2-methyl-2-propenamide
P-07-0416 08/07/07 08/06/07 (G) Aziridine homopolymer
derivative
P-07-0429 08/08/07 08/06/07 (G) Substituted propenoic
acid polymer with
substituted bisethanol
and substituted
cyclohexane
P-07-0437 09/04/07 08/26/07 (G) Siloxanes and
silicones, di-alkyl,
chlorine-terminated,
polymers with 2-
ethylhexyl acrylate-
polyoxyalkylene glycol
reaction products,
polyoxyalkylene glycol
mono-alkyl ether-
terminated
P-07-0441 09/04/07 08/27/07 (G) Glycerides, alkyl
P-07-0443 09/05/07 08/30/07 (G) Methacrylate copolymer
with phosphinicobis
methacrylate and 2-
(phosphonooxy) ethyl 2-
methyl-2-propenoate,
sodium salt,
peroxydisulfuric acid
([ho)s(o)2]2o2)
diammonium salt-initiated
[[Page 56352]]
P-07-0469 09/06/07 08/30/07 (G) Magnesium hydroxide
surface treated
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: September 24, 2007.
Chandler M. Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E7-19543 Filed 10-2-07; 8:45 am]
BILLING CODE 6560-50-S